Airslide Aeration Unit Packages on FLSmidth Inc. (F.L. Smidth, Inc.)


	Home

	Pneumatic Conveying

	Pneumatic Blending

	Upgrades, Accessories, and Maintenance

	Air Compressors

	Gas Compressors

	Air Gravity Conveyors and Airslide™ Systems

	Feeders, Airlocks & Rotary Valves

	Diverter Valves

	Fuller-Kinyon™ Pumps (Material Handling Pump, FK Pump, Screw Pump)

	Railcar/Truck Unloading

	Ship & Barge Unloading Systems

	Storage Reclaim Equipment

	Contact Us/RFQ

	FLSmidth Pneumatic Transport Corporate Site

All Categories > Storage Reclaim Equipment > Airslide Aeration Unit Packages > View Items

Download PDF Print

Printable Page Email

Email This Page

Save To Favorites


	Airslide Aeration Unit Packages
	Check up to five results to perform an action.

	Airslide™ Aeration Unit Packages General Each Airslide Aeration Unit Package consists of standard FLSmidth 8-inch (200 mm) open type Airslide conveyor units in lengths of 5 and 10 feet (1.5 and 3 m) depending on the slope length of the conical storage area. Each package consists of three or six Airslide conveyor units for layout as three or six spoke patterns. Three spoke patterns are normally used with materials which have good fluidizable characteristics. Six spoke patterns provide maximum aeration for difficult materials which can be fluidized. Airslide conveyor units have been successfully used in handling fine, dry materials such as cement, gypsum, soda ash, fly ash and dusts, barites, bentonite, hydrated lime, ground limestone, ground ores, alumina, alumina hydrate, catalysts, silica, phosphates, talc, detergent and soap powder, calcined magnesite and other materials. Material should be generally no less than 40 percent passing 200 mesh. Construction Each unit is a standard 8-inch (200 mm) Airslide conveyor unit [10-inch (250 mm) installation width] constructed of fabricated steel plate covered with a specially woven polyester fabric which can handle materials up to 350°F (175°C). Air Supply A source of clean, dry air is required. Minimum SCFM for each package is listed. Pressures should be 3 - 5 PSIG (.21 - .35 Kg/cm²) minimum at the aeration unit. Blower units, such as Sutorbilt/Roots blower units offered by FLSmidth, are a reliable, economical source of air for the aeration packages.
	larger image	larger image